| Shown at the right and below are pictures of the existing
basement before remodeling started. Although having been
"finished" with paneling and a suspended ceiling, it still had
an unfinished look to it. |
|
|
|
|
| The first thing done was to move the dryer from its
current location, seen above, to the room previously occupied only by
the furnace. The picture at the right shows the area after the
furnace room partition had been removed. This wall will be
reconstructed later. |
|
|
|
A new electrical line was run to the dryer's new location,
spliced from the original line. |
| Here, the dryer sits in its new home. The vent is
temporarily connected to a ductless vent contraption until proper
ducting can be installed. The washer will eventually be moved next
to it, but other aspects of the basement must be completed before the
washer can be moved, |
|
|
|
A wider view of the dryer in the furnace room. |